2-megapixel medical monitor

MX243W RadiForce

The 24" colour monitor in widescreen format shows radiological images of specific tasks as well as images in pathology with the required precision.

  • 61 cm (24,1")
  • 2.3 Megapixels (colour)
  • 16:10 Aspect ratio
Product image MX243W RadiForce

Image quality

Precise, high-contrast, bright and crisp screen

Excellent image quality for the finest details

Thanks to the high 2.3 Megapixels (colour) resolution, a strong contrast ratio of 1350:1 and stable brightness of up to 410 cd/m2, the monitor offers excellent image quality. Even the differences between the finest details are shown – regardless of your viewing angle. This is a great advantage if multiple physicians are looking at the screen.

The MX243W has a so-called wide gamut display. Thanks to the wide colour gamut, it can display highly saturated colour tones that are not visible on conventional colour LCDs.

ImageQuality_ExcellentImageQuality_MX.jpg

Observe monochrome and color images on a single monitor

The hybrid gamma PXL functionality automatically differentiates between monochrome and colour images, pixel by pixel. This creates a hybrid display on which each pixel is displayed with the ideal tone value. In this way, a high level of precision and reliability is achieved.

The MX243W displays sophisticated monochrome images just as reliably as color images from various modalities. In practice, this means a significant increase in efficiency, as images from different imaging procedures can be displayed on just one monitor.

ImageQuality_HybridGammaPXL.jpg

Blur reduction

LCD panels with a high brightness level tend to have more blurry image rendering thanks to over-framing than would be possible in comparison with an acquired exposure. Therefore, EIZO offers blur reduction anchored in monitor hardware. It retrieves details lost in the contours on the screen, meaning that the image is rendered as clearly as possible.

One billion color tones thanks to 13 bit LUT

Color rendering is controlled by a 13 bit look-up table (LUT), up to 10 bits of which are available in the DisplayPort connection. This produces a resolution with a maximum of 1 billion color tones. The rendering characteristic and fine structures required for diagnostics can therefore be precisely identified.

ImageQuality_13bitLUT_with.jpg

With 13 bit LUT

ImageQuality_13bitLUT_without.jpg

Without 13 bit LUT

Better viewing thanks to the widescreen format

Thanks to the aspect ratio of 16:10 or 16:9, you can see considerably more from a horizontal perspective than on conventional monitors, for example when performing clinical reviews on two adjacent images.

Uniform brightness and high color purity

The monitor shines thanks to its high color purity and uniform illumination. This is down to the Digital Uniformity Equalizer (DUE), which corrects imbalances automatically, pixel by pixel. Gray and color tones of radiological and other medical images are correctly rendered over the entire display. This is essential for precise image reproduction.

Constant brightness during operation

A sensor for the backlight permanently determines the luminance of the monitor. The benefit: The defined and calibrated values are rendered exactly just seconds after the monitor is turned on and remain constant during the entire period of use. The sensor is invisibly integrated in the monitor.

ImageQuality_ConstantBrightness.jpg

Back of the monitor

Software and ease of use

Features for greater comfort

Consistently secure image quality

SoftwareUse_RadiCS.jpg

RadiCS LE

Brightness and DICOM® characteristic curve can be checked using the RadiCS LE software and automatically calibrated according to the factory default settings. The optionally available UX2 sensor is used for this purpose. The calibration of other tone value curves, such as CIE, is also possible with RadiCS LE.

The Work-and-Flow technology

With the increasing digitisation of modalities, radiologists are confronted with a growing amount of information on their screens. EIZO's unique work-and-flow technology, with new features designed to meet the needs of radiologists, effectively counters the complexity of data. The RadiForce MX243W and RadiCS-LE software solution enable you to benefit from the Work-and-Flow functions.

More information about the Work-and-Flow functions

Point-and-Focus: all eyes on the analysis

The Point-and-Focus function allows you to select and focus on relevant image areas quickly using your mouse or keyboard. By adjusting the brightness and greyscale, the interesting parts of an image are highlighted by dimming the surrounding areas.

WaF_Point-and-Focus.gif

Improved comfort

Efficiency in diagnostics

Extended durations of use thanks to automatic shut down

The monitor has an automatic shut down option for the backlight (backlight saver). This extends the duration of use. Similar to a screen saver, the LEDs turn off when the screen is not being used. 

The backlight saver is part of the RadiCS software.

Ergonomic stand

Ergonomic and stable: the adjustable stand focuses on ergonomics. You can rotate, swivel and tilt the monitor stand until you find the most comfortable setting for your back, neck and sitting posture. It features continuous height adjustment and can be lowered almost to the base plate of the stand, enabling you to position the top image line ergonomically right below your eye level.

foot_height.png
Height

90 mm

foot_tilt_FlexScan.png
Tilt

Between 5° forwards and 30° backwards

foot_swivel_FlexScan.png
Swivel

70°

foot_pivot_left.png
Rotation

anti-clockwise

Display of DICOM® characteristic at the press of a button

EIZO measures and adjusts each tone of grey carefully so that the monitors comply with the DICOM® standard when delivered from the factory. The result is a particularly consistent gradation of grey tones, allowing for optimal radiological clinical reviews.

Diagnostics_DICOM-Characteristic.jpg

Connections for two computers

DisplayPort and DVI-D input enable the connection of two image signals. You can therefore connect two computers simultaneously. You can switch between them automatically or manually, if desired.

Diagnostics_Ports2PCs.jpg

Daisy chain method

Efficient multi-display solution

Thanks to the signal input and output, you can link several RadiForce monitors through their DisplayPort interface. This means that you can realise multi-monitor solutions with the greatest of ease – without labourious and excessive cabling.

RadiLight: Eye-friendly comfort light

EIZO offers a brand-new, easy-to-operate comfort light for radiologists who work in dark diagnosis rooms. The soft illuminance in the background of the screen reduces the strain on the eyes that frequently occurs due to constant light-dark changes between bright screens and objects in a dark environment.

Diagnostics_RadiLight.jpg

Sustainability

Environmentally and socially conscious production

Environmentally friendly use of materials

The MX243W consists of approximately 19% recycled plastic. This reduces the amount of plastic waste entering the environment, conserves resources and promotes the reuse of materials to preserve natural ecosystems.

Sustainability_Plastic_RF.jpg

Environmentally friendly packaging

For the packaging of the MX243W, EIZO uses a padding made of moulded pulp cellulose. The material is made from recycled cardboard and paper and has a much lower environmental impact when disposed of than traditional polystyrene or plastic. All cables are stored in a cardboard compartment instead of being individually packed in plastic bags.

Sustainabilty_Packaging_RadiForce.jpg

Left: conventional packaging / Right: environmentally friendly materials

Socially responsible production

The MX243W is produced in a socially responsible way. It is free of child labour and forced labour. Suppliers along the supply chain have been carefully selected and they have also committed themselves to produce in a socially responsible way. This applies in particular to conflict minerals. We present a detailed report about our social responsibility annually and voluntarily.

Sustainability_Production.jpg

Environmentally and climate friendly

Each MX243W is manufactured in our own factory, which implements an environmental and energy management system in accordance with ISO 14001 und ISO 50001. This includes measures to reduce waste, wastewater and emissions, resource and energy consumption, as well as to encourage environmentally conscious behavior among employees. We publicly report on these measures on an annual basis. 

Sustainabilty_ISO14001.jpg

Sustainable and durable

The MX243W is designed to have a long service life and normally outlasts the warranty period by some distance. Replacement parts are available many years after production has ceased. The entire lifecycle takes into account the impact on the environment as the longevity of the product and the fact it can be repaired saves resources and protects the environment. When designing the MX243W, we took a minimalistic approach to our resources by using high-quality components and materials, as well as a careful production process.

Sustainabilty_Durable_RadiForce.jpg

Warranty

Highest investment security

Five-year warranty

EIZO grants a five-year warranty. This is possible thanks to the highly developed production process based on a simple principle of success: sophisticated and innovative technology, made from high-end materials.

Warranty_5Y_EN.jpg

Graphics board recommendation

For precise diagnostics

EIZO Graphics card MED-XN43

The EIZO graphics card supports the properties, functions, and settings of the RadiForce MX243W optimally. It enables precise diagnosis and can control several monitors simultaneously. EIZO offers technical support and warranty service for the graphics card.

To the graphics card overview

MED-XN43.jpg

Technical Data

General
Item no.
MX243W
Case color
Black
Areas of application Healthcare
Product line RadiForce
Areas of application Computed tomography/MR imagine, Pathology, (when using EIZO monitors for pathology, it is recommended to evaluate the entire system including the scanner), Dentist, Dental diagnostic room, Nuclear medicine and radiotherapy, Non-destructive-testing
Screen
Screen size [in inches] 24,1
Screen size [in cm] 61
Format 16:10
Viewable image size (width x height) [in mm] 518,4 x 324
Resolution in MP 2.3 Megapixels (colour)
Ideal and recommended resolution 1920 x 1200
Pixel pitch [in mm] 0,27 x 0,27
Supported resolutions 1920 x 1200, 1920 x 1080 (Full HD), 1680 x 1050, 1600 x 1200, 1280 x 1024, 1024 x 768, 800 x 600, 720 x 400, 640 x 480
Panel technology IPS
Max. viewing angle horizontal 178
Max. viewing angle vertical 178
Number of colors or greyscale 1.07 billion colors (DisplayPort, 10 Bit), 16.7 million colors (DVI, 8 Bit), 16.7 million colors (DisplayPort, 8 Bit)
Color palette/look-up table 543 billion colour tones / 13 bit
Max. brightness (typical) [in cd/m²] 410
Factory calibrated brightness [in cd/m²]. 220
Max. dark room contrast (typical) 1350:1
Max. refresh rate [in Hz] 60
Backlight LED
Features & Operation
Preset color/greyscale modes 2x manual memory locations, Text, sRGB, DICOM
DICOM tone curve
Hardware calibration of brightness and light density characteristic curve
Digital Uniformity Equalizer (homogeneity correction)
Sensors Backlight Sensor
On-screen menu languages de, en, fr, es, it, se
Adjustment options DICOM tonal value, Brightness, Contrast, Color temperature/White point, Gamma, Color saturation, Resolution, Scaling, Monitor reset, OSD language, Signal input, Blur reduction
Integrated power unit
Connections
Signal inputs DisplayPort (HDCP 1.3), DVI-D (HDCP 1.4)
USB specification USB 2
USB upstream ports 1 x type B
USB downstream ports 2x type A
Graphic signal DVI Single Link (TMDS), DisplayPort
Electrical data
Frequency Digital: 31-76 kHz/59-61 Hz
Power consumption (typical) [in watts] 25
Maximum Power Consumption [in watts] 56 (at maximum brightness with all signal inputs and USB ports in use)
Max. Power consumption in stand-by mode [in watts] 0.6
Power consumption with power switch off [in watts] 0
Power supply AC 100-240V, 50/60Hz
Power management
Dimensions & Weight
Dimensions (incl. stand) (width x height x depth) [in mm] 552 x 431-521 x 200
Weight (incl. stand) [in kg] 7.8
Weight (without stand) [in kg] 4.9
Dimension drawing (PDF) Dimension drawing (PDF)
Rotatability of the stand [in °] 70
Tiltability forwards/backwards [in °] 5 / 30
Pivot between portrait / landscape anti-clockwise
Height adjustment range [in mm] 90
Hole spacing 100 x 100
Certification & Standards
Certification CE (Medical Device), UKCA (Medical Device), ANSI/AAMI ES60601-1, CSA C22.2 Nr. 601-1, IEC60601-1, RCM, FCC-B, CAN ICES-3 (B), VCCI-B, RoHS, WEEE, China RoHS, CCC, EAC
Software & Accessories
Accompanying software and other accessories are available for download RadiCS LE
Other box contents USB cable (Type A - Type B), Signal cable DisplayPort - DisplayPort, Manual via download, Power cord
Accessories RadiCS (UX2-Kit), RadiLight, MED-XN43
Recommended graphics card MED-XN43
Warranty
Warranty periode 5 years

Downloads & Service

Around your product

Manuals & Documents

Manual - MX243W

Datasheet - MX243W

PDF | 6 MB

Product images MX243W

ZIP | 7 MB

Recommended graphics cards for RadiForce monitors

PDF | 2 MB

RadiForce brochure

PDF | 9 MB

Software

Device driver - MX243W

Monitor Test

Test the properties and parametres of your monitor quickly and easily with software developed in-house at EIZO.

RadiCS

The EIZO software is capable of complete quality management – from calibration through asset management to acceptance and constancy testing.

RadiCS LE

RadiCS LE quality control software calibrates EIZO RadiForce monitors and manages the calibration data.

RadiNET Pro

EIZO software for network-supported quality management in larger establishments – with remote function for monitors.

FAQs

EIZO has developed the RadiCS software specifically for quality assurance for image display devices in the RadiForce range. It offers extensive tests and automatic alignment to guarantee constant and consistent image reproduction on all RadiForce LCD monitors, but also supports screens from other manufacturers. The software automatically executes test images and helps to perform measurements and assessments in accordance with the guidelines in a cost-effective and time-effective manner. For example, measurement results are automatically transferred to the documentation and archived and can be centrally managed using the optional RadiNET Pro software. A calendar with a reminder function ensures timely checks are performed. A suitable measurement device is required to measure the luminance, including veiling luminance. Measured values from various luminance meters are automatically read by RadiCS.

Software RadiCS

According to the Federal Ministry for the Environment, Nature Conservation and Nuclear Safety (BMU), the quality assurance guidelines are according to the X-ray ordinance (QS-RL): "Quality assurance measures for X-ray devices to examine or treat humans".

DIN V 6868-157. This DIN governs the acceptance test and constancy test for image display systems in radiography in order to ensure the necessary image quality.

Depending on the body region / methods, different EIZO RadiForce screens are suitable for image display systems in accordance with DIN 6868-157. The EIZO RadiCS quality assurance software is divided into classes I to VIII. The following table shows a classification of suitable screens in this regard. 

Note: An acceptance test is necessary for each image display system for an evaluation in accordance with DIN 6868-157.

In accordance with DIN 6868-157, different minimum requirements are placed on image display devices depending on the body region / method. The EIZO RadiCS quality assurance software is divided into classes I to VIII. The following table shows a classification of the classes and minimum requirements in this regard. 

Note: An acceptance test is necessary for each image display system for an evaluation in accordance with DIN 6868-157.

To keep your monitor looking like new at all times and to prolong the service life of your device, we recommend cleaning it regularly. Clean the casing and LCD surface as described below:

IMPORTANT: Never use thinner, benzene, alcohol (ethanol, methanol or isopropyl alcohol), scouring agents or other strong solvents as these may damage the casing and the LCD display.

Casing
Remove marks by wiping the casing with a soft cloth, which you have previously moistened with a mild cleaning agent. Never spray wax or cleaning agents directly on to the casing. (The manual contains exact details.)

LCD display
Where necessary, the monitor surface may be cleaned using a soft cloth (for example a cotton cloth or glasses cloth). Stubborn marks can generally be removed by wetting the cloth with a bit of water to increase the cleaning strength.

Homogeneous luminance distribution and good color purity are key to achieving very accurate image rendering. The Digital Uniformity Equalizer (DUE) circuit takes care of this. It automatically corrects non-uniformities in terms of luminance and chrominance for all tone values across the entire image area – pixel by pixel.

The warranty for EIZO RadiForce monitors is 5 years for most models including an on-site replacement service. EIZO recommends an image brightness that is considerably higher than the minimum requirements in accordance with QS RL for monitors used for medical diagnostics. This recommended brightness is guaranteed by EIZO.
The corresponding product data sheets show which guarantee applies to which RadiForce model.

Both the installation wizard in RadiCS 5 and the corresponding functionality in RadiNET Pro enable an upgrade including data migration.

An important prerequisite for this is that the installed RadiCS 4 Version must be Version 4.6.1 or higher. For that reason, you should carry out an update beforehand for older RadiCS 4 installations.

EIZO monitors support DisplayPort Alternate Mode with their USB-C interface. This means they can correctly display image signals from Thunderbolt 3 or Thunderbolt 4 ports via USB-C connection. The USB-C signal cable supplied by EIZO with the monitor has the optimal suitability.

Alternatively, monitors with a DisplayPort socket can be connected using a suitable cable. The CP200 signal cable (USB-C (TB3/TB4) to DisplayPort) provided by EIZO is the most suitable.

A connection from Thunderbolt 3 or Thunderbolt 4 ports to the HDMI interface of the monitor can work with suitable active adapters/cables. However, we recommend using the USB-C or DisplayPort interface of the monitor.

10 of 36 FAQs are shown

Warranty

EIZO provides up to a five-year warranty, although some devices have a different warranty period. You can find out the exact warranty periods for each product either in the warranty terms and conditions above, in the datasheet, or on the EIZO international website. The long warranty periods are made possible by a highly developed manufacturing process based on a simple principle of success: sophisticated and innovative monitor technology, manufactured from high-end materials. For you, the 5-year warranty means a high level of investment security and savings on follow-up costs (total cost of ownership), which would be incurred without warranty service, for example, for maintenance and repairs.

  • Innovative service concept from EIZO, which sets standards and meets the trend towards longer depreciation periods. Safety that convinces and you can count on.
  • First-class material and careful processing provide for the extraordinary longevity and make so long guarantee durations possible.
  • Follow-up costs that would be incurred without warranty service, e.g. for maintenance and repairs, are avoided and lead to optimized cost transparency (Total Cost of Ownership (TCO).
Details about the EIZO warranty services